Conditions Which Generate This Code:
The ECM detects the following conditions:
• The timer for the PTO has expired and the engine has shut down.
• The PTO On/Off switch is in the ON position.
• The “PTO Configuration” parameter is programmed to “Cab Switches”, “Remote Switches”, or “Remote Throttle”.
• The “PTO Shutdown Time” parameter is programmed to at least three minutes.
System Response:
The ECM remains powered after the engine shutdown. “NOT ACTIVE” will be displayed next to
the status for “PTO Shutdown” on the electronic service tool.
Customer Passwords are required to clear this diagnostic code.
Possible Performance Effect:
The engine is shut down.
Troubleshooting:
Perform the following diagnostic procedure: “PTO Shutdown Timer – Test”
Results:
• OK – STOP.
