Posted on by

Cummins Service Products Catalog – Tool 3375317Injector Test Stand

SMALL | MEDIUM | LARGE

SMALL | MEDIUM | LARGE

SMALL | MEDIUM | LARGE

Engine Family: All Except B and C Series

This test stand is used to test and calibrate Cummins injectors without the use of master injectors. All the necessary adapters and special cams are provided to test all current Cummins injectors. Master injectors are used for reference only to determine flow output of the test stand.

Order test stand kit below according to your electrical requirements.

   
3375410  Injector Test Stands (220 Volt, 3 Phase, 60 Hz.)
3822486  Injector Test Stands (220 Volt, 3 Phase, 50 Hz.)
3822487  Injector Test Stands (440 Volt, 3 Phase, 60 Hz.)
3822488  Injector Test Stands (440 Volt, 3 Phase, 50 Hz.)
Each test stand kit includes the following:
——- Test Stand
3375365  Calibration Fluid (30 Gallon)
3823753  Adapter Pot (L10-STC)
3376135  Burnishing Tool 
3823386  Cam (.272 lift, 91L10 & 91N14)
3823357  Cam (.248 lift, NT-STC)
3376169  Cam (.169 lift, Small Cam Top Stop)
3376170  Cam (.230 lift, Big Cam Top Stop)
3823233  Adapter Pot (L10 Top Stop)
3823838  Adapter Pot (3/8 PTD & 91N14)
3822652 Audit kit must be ordered separately as desired so that routine performance checks can be completed.
Ref. No. Part No. Description
1 3375467  Locator Pin (for Pots)
2 3375468  Fuel Filter (Tank)
  3376989  Adapter (Spin On Filter)
3 3375469  Drive Belt 
4 3375470  High Pressure Inline Filter 
6 3375479  Temp/Metering Control (Printed Circuit Board)
6 3377228  Rebuilt Temp/Metering Control Board 
7 3375480  Fuse (1 Amp)
8 3375481  Fuse (5 Amp)
9 3375482  Link, 1 ring (3/8 PTB/PTC)
9 3375483  Link, 2 ring (3/8 PTB/PTC)
9 3375484  Link, 3 ring (3/8 PTB/PTC)
9 3375485  Link, 4 ring (5/16 PTB/PTC)
9 3375487  Link, 6 ring (H/NH/J-C)
9 3375488  Link, 7 ring (3/8 PTD)
9 3375489  Link, 8 ring (5/16 PTD)
9 3375490  Link, 9 ring (K-PTD)
9 3376308  Link, 11 ring (High Feed Port, Flanged PTD)
9 3376309  Link, 10 ring (3/8 PTD Flanged)
10 4918929  Rotary Control Valve PTFE Face 
11 3375638  Metering Switch (Orange)
12 3375639  Main Drive On Switch Fuel System (Green)
13 3375640  Main Drive Stop Switch (Red)
14 3375642  Heat Sink Assembly 
15 3375642  Cam (Std. PTD (.189 lift))
15 3375645  Cam (K-PTD (.310 lift))
15 3376169  Cam (Small Cam Top Stop (.169 lift))
15 3376170  Cam (Big Cam Top Stop (.230 lift))
16 3375643  Adapter Pot (3/8 PTD)
16 3823838  Adapter Pot (3/8 PTD Top Stop)
16 3375646  Adapter Pot (K PTD)
16 3375648  Adapter Pot (5/16 PTB/PTC)
16 3375649  Adapter Pot (3/8 PTB/PTC)
16 3823233  Adapter Pot (L10)
16 3376862  Adapter Pot (K STC)
17 3375651  Plug, Clamp Cylinder & Pressure Block 
18 3375652  Cylinder Slide Ring (Clamp Cylinder)
19 3375653  Gasket (Clamp Cylinder)
20 3375654  O’ring (Gaco)
21 3375655  Packing Seal (Gaco)
22 3375656  Packing Seal (Gaco)
23 3375657  Glyd Ring (Clamp Cylinder Seal)
24 3165098  Digital Indicator Gauge Kit 
25 3375663  Nylon Washer, Fuel Arm 
26 3375665  Lower Oil Seal, Cam Box 
27 3375666  Lower Gasket, Cam Box 
28 3375667  Upper Gasket, Cam Box 
29 3375668  Gasket, Tappet Housing 
30 3375670  O-ring, Cam Box Cover 
31 3375674  Cam Drive Key 
32 3375676  Datum Valve Assembly 
33 3375679  Thermistor, Fuel Tank 
34 3375680  Heater, Fuel Tank 
35 3375682  Transducer Cable Assembly (for Magnetic Pick Up)
36 3375683  Transducer Cable Assembly (for Fuel Arm)
37 3376314  Nylon Driven Gear, Stirrer 
37 3376316  Steel Drive Gear, Stirrer 
38 3375751  Roller Bearing, Datum Valve Lever 
39 3375752  Tapered Bearing, Camshaft 
40 3375754  Tank Thermostat 
41 3375755  Switch (Float Tank, Mod. D)
42 3375756  Contactor (208/240 V. 60 Hz. Mod. D)
42 3375926  Contactor (208/240 V. 60 Hz. Mod. C Stands)
43 3375757  Overload, 5.5 – 8 Amp, OL1 Mod. D Stands 
43 3375927  Overload, 6 – 9 Amp, OL1 Mod. C Stands 
43 3376310  Overload, 10 – 13 Amp, Mod. D heavy duty 
46 3376174  Overload, 4 – 6 Amp Mod, D heavy duty 
46 3375759  Overload, 1.6 – 2.5 Amp Mod. D 
46 3375928  Overload, OL2 2.7 – 4 Amp Mod. C Stands 
50 3375760  Valve, Ball (On/Off)
50 3376825  Repair Kit, Valve Seat (for 3375760 Ball Valve)
51 3375761  Housing, Strainer-Cooler Inlet 
52 3375762  Assembly, Strainer Disc 
53 3375763  Block, Auxilliary Contact 
54 3375800  Filter, Metering Head 
55 3375801  By-Pass Tube 
56 3375802  Valve, Intake 
57 3375803  Valve, Exhaust 
57 3375478  Replacement Solenoid Coil (for 3375802 & 3375803)
58 3375804  Valve, Cooler 
58 3375477  Replacement Solenoid Coil (for 3375804 (230V))
58 3376043  Replacement Solenoid Coil (for 3375804 (440V))
Note: 3376621 is a ¼ NPT 220/240 VAC Solenoid Valve which replaces 3375804 for most North American requirements.
  3375805  Lapping Paste 
61 3375963  Gear Pump Adapter Kit (Includes 61A, B, C, D & E)
61 3375964  Gear Pump Adapter Kit (Includes 61B, C, D & E)
61A 3375962  Gear Pump 
61B   Included in 3375964 Kit
61C 3375975  Valve, Pressure Relief 
61D 3376252  Tube Nut, 10 mm 
61E 3376253  Tube Sleeve, 10 mm 
62 3375972  Assembly, Cooler Tube 
64 3375976  Seal, Index Cylinder 
65 3375977  Gasket, Index Cylinder 
66 3375978  Seal, Index Cylinder 
67 3375979  Rod, Index Cylinder 
68 3376305  Ring, NH Flanged Inj. 
69 3376306  Locator, NH Flanged 
70 3376307  Knob, Banjo 
71 3376313  Cover, Cam Box 
73 3376315  Door Catch 
75 3376323  Stirrer Gear Kit 
Contains: 3376314 & 3376316 (ref. 37)
  3376971  Assembly, Stirrer Drive 
76 3376249  Indicator, Neon, 220 V 
76 3376044  Indicator, Neon, 440 V 
77 3376251  Counter, Hours (60 Hz) 
78 3376469  Inertia Damper 
79 3375473  Fuel Arm Assembly Includes:
80 3375474  O’ring, Nose Piece 
81 3375475  Spring, Left Side 
83 3375968  Spring, Right Side 
84 3375969  Collar, Spring 
85 3375970  Housing, Fuel Nozzle Spring 
86 3375971  Washer, Dowty 
87 3375973  Fitting, Banjo 
88 3375974  Bolt, Banjo 
89 3375664  O’ring, Nozzle Valve 
90 3375675  Valve, Fuel Nozzle 
91 3375678  Nylon Washer, Fuel Nozzle 
92 3375672  Tappet Assembly 
  3376970  Repair Kit, Tappet 
93 3375671  Packing Ring (Datum Valve Rod) 
94 3375669  Gasket, Tappet Cover 
95 3375673  Fuel Recorder Assembly includes:
96 3165099  Digital Indicator Kit 
97 3376172  Deadweight Assembly 
98 3375797  O’ring, Deadweight 
99 3375798  Gasket, Deadweight 
100 3375799  Capscrew, Deadweight 
101 3376312  Nut, Nyloc 
102 3376311  Washer, Dished 
103 3376173  Nose Cone Assembly includes:
104 3375471  Seal, Nylon Nose Cone 
105 3375472  O’ring, Nose Cone 
106 3375795  Capscrew, Nose Cone 
108 3375930  Adjuster Screw, Nose Cone 
109 3375931  Dowty Washer, Nose Cone 
110 3376079  Ferrule (6 mm) 
111 3376080  Tube Nut (6 mm) 
112 3376171  Ball & Seat Assembly, Nose Cone 
113 3376659  Elbow, Clamp Cylinder 
114 3376660  Locknut, Clamp Cylinder 
115 3376661  Seal Washer, Clamp Cyl. 
116 3376664  Push Button, Orange 
117 3376667  Push Button, Red 
118 3376668  Push Button, Green 
119 3376824  Switch, On-Off 
120 3376743  Piston, Fuel Recorder 
121 3376744  O’ring & Gasket Kit (Fuel Recorder Ass’y)
 
Other kits available, not illustrated:
  3376190  Cam Nose Cone Ball & Seat Ass’y Kit (Kit Includes: 
  3376169  Cam (.169 Lift)
  3376170  Cam (.230 Lift)
  3376171  Ball & Seat Assembly, Nose Cone 
  3823360  Injector Calibration Kit (Kit, K Injectors With 2 Balance Orifices) 
  3376862  Adapter Pot 
  3823358  Cam (.426 Lift)
  3823359  Anti Splash Shield 
  3823963  Master Injector (200 mm3)
Last Modified:  04-Feb-2008
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.