Oil Pressure Sensor Circuit
|
Overview
CODE | REASON | EFFECT |
Fault Code: 135 PID: P100 SPN: 100 FMI: 3/3 LAMP: Yellow SRT: |
High voltage detected at the oil pressure circuit. |
No engine protection for oil pressure. |
![]() Oil Pressure Sensor Circuit
|
Circuit Description
The oil pressure/temperature sensor is used by the electronic control module (ECM) to monitor the lubricating oil pressure. The ECM monitors the voltage on the signal pin and converts this to a pressure value. The oil pressure value is used by the ECM for the engine protection system.
Component Location
The oil pressure/temperature sensor is located on the engine block to the left of the fuel filter, behind the air compressor.
Shop Talk
Does the fault occur only in cold weather? If so, allow the oil to warm up and see if the fault goes inactive.
Refer to Troubleshooting Fault Code t05-135.
Last Modified: 26-Oct-2010