Posted on by

Electronic Control System Signature, ISX and QSX15 Engines – FAULT CODE 536

Autoshift Low Gear Actuator (Lockout Solenoid) Circuit


Overview

CODE REASON EFFECT
Fault Code: 536
PID: S044
SPN: 718
FMI: 11/11
LAMP: Yellow
SRT: 

Either low voltage detected on autoshift low gear actuator circuit when (+) 12 VDC are commanded or voltage detected when no voltage is commanded.

Top 2 lockout solenoid will not function properly. Transmission will not shift properly.
Top 2 Lockout Solenoid Circuit
SMALL | MEDIUM | LARGE

Circuit Description

The autoshift low gear actuator is an ECM-driven solenoid that controls a Top 2 transmission.

Component Location

The autoshift low gear actuator is located on the topside of a transmission toward the back. Use the OEM diagram for a specific location.

Refer to Troubleshooting Fault Code t05-536.

Last Modified:  26-Oct-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.