ISM, ISMe, and QSM11 – 001-053   Water Header Plate, Cylinder Block

Install two guide pins, Part Number 3376488, in the top row of the water header plate mounting capscrew holes.

Install the water header plate and capscrews. Use a new gasket

Remove the two guide pins and install the other two capscrews.

The capscrews are not tightened to their final value until all related components are installed.

Install the coolant heater housing (3). Refer to Procedure 008-012 in Section 8.

Install the coolant filter head and filter (2). Refer to Procedure 008-007 in Section 8.

Install the coolant thermostat housing support and gasket (6). Refer to Procedure 008-015 in Section 8.

Tighten all capscrews in the sequence shown.

Install two guide pins, Part Number 3376488, in the top row of the water header plate mounting capscrew holes.

Install the water header plate and capscrews. Use a new gasket.

Remove the two guide pins, and install the other two capscrews.

The capscrews are not tightened to their final value until all related components are installed.

Install the coolant heater housing (3). Refer to Procedure 008-012 in Section 8.

Install the coolant filter head and filter (2). Refer to Procedure 008-007 in Section 8.

Install the coolant thermostat housing support and gasket (6). Refer to Procedure 008-015 in Section 8.

Tighten all capscrews in the sequence shown.