Posted on by

ISM, ISMe, and QSM11 – 002-004   Cylinder Head

Table of Contents

Remove

Remove

 TOC

 WARNING 

This component or assembly weighs greater than 23 kg [50 lb]. To prevent serious personal injury, be sure to have assistance or use appropriate lifting equipment to lift this component or assembly.

Remove the seven 12-point cylinder head capscrews on the fuel pump side of the engine.

SMALL | MEDIUM | LARGE


Remove the remaining 32 cylinder head capscrews in the sequence shown.

Three capscrews are located inside the intake ports.

SMALL | MEDIUM | LARGE
   


Install cylinder head lifting bracket, Part Number 3822479, with two rocker lever support mounting capscrews and two of the long rocker housing mounting capscrews.

Tighten the capscrews.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
   


 CAUTION 

Place the cylinder head on wood blocks to prevent damage to the combustion face.

Use a hoist or hydraulic arm to remove the cylinder head.

Remove the cylinder head gasket.

SMALL | MEDIUM | LARGE
Last Modified:  05-Aug-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.