Posted on by

ISM, ISMe, and QSM11 – 006-026   Injector

Table of Contents

Remove

Remove

 TOC

Disconnect the injector wires. Number the injector electrical connections as they are removed. They must be connected to the same cylinder when they are installed.

Remove the clamp capscrew and injector hold-down clamp.

SMALL | MEDIUM | LARGE


Remove the injectors with injector tool, Part Number 3823579. Insert the pin of the tool into the hole provided in the body of the injector.

SMALL | MEDIUM | LARGE
   


If injector puller, Part Number 3823579, is not available, carefully use a pry bar. Pry upward on the injector against the cylinder head.

  
SMALL | MEDIUM | LARGE
Last Modified:  23-Jan-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.