Posted on by

ISM, ISMe, and QSM11 – 012-109   Air Compressor Inlet Tube

Table of Contents

Install

Install

 TOC

Install the existing hose and clamps at the end of the rear end of the air compressor inlet tube that connects to the air compressor.

Place the long section of the line on the air compressor.

Install tube mount and the flange nut on the cylinder head fuel rail mounting stud and tighten the flange nut.

Torque Value:  20  n.m  [180 in-lb]

Place the existing hose and the existing clamps on the rear end of the air compressor inlet tube where it mates to the exhaust manifold side of the air compressor inlet tube.

SMALL | MEDIUM | LARGE


Place the existing hose and clamps on the mixer feed tube.

Install the exhaust manifold side of the air compressor inlet tube. Install tube mount and the flange nut to the intake manifold mounting stud.

Tighten the flange nut.

Torque Value:  20  n.m  [177 in-lb]

Tighten the hose clamps.

Torque Value:  8  n.m  [71 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  13-Feb-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.