Accelerator Pedal or Lever Position 1 Sensor Circuit Frequency –
Data Valid but Below Normal Operational Range – Most Severe Level
|Fault Code: 147
Accelerator Pedal or Lever Position 1 Sensor Circuit Frequency – Data Valid but Below Normal Operational Range – Most Severe Level. A frequency of less than 100 HZ has been detected at the frequency throttle input to the ECM.
Severe detate in power output of the engine. Limp home power only.
Frequency Throttle Circuit
This type of throttle interface is designed to accept a variable frequency signal as the throttle signal. An electronic component generates a square wave logic-level signal in which the frequency of the signal corresponds to a throttle command. The frequency values are established by the calibration in the electronic control module (ECM).
Throttle location varies with each OEM. Refer to the OEM troubleshooting and repair manual.
The frequency throttle can be used in conjunction with a voltage throttle or by itself.
- Open circuit in the frequency throttle signal wire.
- Shorted to ground frequency throttle signal wire.
- Failed frequency throttle.
- Incorrect frequency throttle reference (input) voltage.