1. Install the left accessory/lift bracket.
Notice : Refer to Fastener Notice in Cautions and Notices.
2. Install the left accessory/lift bracket retaining bolts.
Tighten
Tighten the bolts to 50 N-m (37 Ib ft).
3. Install the left accessory/lift bracket retaining nut (if equipped).
Tighten
Tighten the nut to 50 N-m (37 Ib ft).
4. Install the vacuum pump.
5. Install the vacuum pump retaining bolts.
Tighten
Tighten the bolts to 25 N-m (19 Ib ft).
6. Install the drive belt tensioner.
7. Install the drive belt tensioner retaining bolt.
Tighten
Tighten the bolts to 50 N-m (37 Ib ft).
