Paccar MX-13 – Filling oil, turbocharger

– The turbocharger bearing housing must be filled with engine oil after replacement.

– Only the procedure below guarantees that oil reaches the turbine shaft bearing.

1. Check the engine oil level and, if necessary, refill with engine oil.

2. Disconnect the crankshaft and camshaft sensor.

3. Crank the engine for 60 seconds.
Now the turbocharger is filled with engine oil.

4. Wait for 300 seconds to cool down the starter motor.

5. Connect the crankshaft and camshaft sensor.

 

Leave a Reply

Your email address will not be published. Required fields are marked *