1. Clean the area around the common rail pump unit and the exterior of the fuel tank.
2. Open the fuel tank cap to release the overpressure in the fuel system.
3. Unscrew the common rail pump unit bolts two turns.
Make sure that the fuel gallery is empty before removing the common rail pump units.
4. Position two screwdrivers under the common rail pump unit flange and tip it loose.
5. Unscrew the common rail pump unit bolts further.
6. Tip up the common rail pump unit again with the screwdrivers.
Keep tipping up the common rail pump unit in this manner until it follows the attachment bolts.
7. Cover the common rail pump unit opening in the engine block.
If reusing the common rail pump unit,