Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 008-014   Coolant Thermostat Housing

Table of Contents

Remove

Remove

 TOC

Remove the upper radiator hose from the thermostat housing and disconnect the air compressor coolant return line from the thermostat housing.

  
SMALL | MEDIUM | LARGE


Remove the capscrews that attach the thermostat housing to the rocker lever housing.

SMALL | MEDIUM | LARGE
   


Remove the thermostat housing from the water transfer tube.

SMALL | MEDIUM | LARGE
   


Remove the thermostat cover capscrews and disassemble the thermostat housing.

If the thermostat housing assembly is being replaced, remove the coolant temperature sensor from the thermosat housing.

SMALL | MEDIUM | LARGE
   


Remove the thermostat from the cover.

Inspect the thermostat seal and the thermostat cover gasket surface. Refer to Procedure 008-016 in Section 8.

SMALL | MEDIUM | LARGE
Last Modified:  21-Nov-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.