Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 007-041   Lubricating Oil Viscosity Sensor

Table of Contents

Remove

Remove

 TOC

Disconnect the pressure signal line (1) from the lubricating pump fitting.

Disconnect the rifle pressure supply line (3) from the oil rifle fitting (4).

SMALL | MEDIUM | LARGE


Disconnect the viscosity sensor drain line from the cylinder block fitting.

SMALL | MEDIUM | LARGE
   


Remove the two mounting bracket capscrews from the pan rail.

Remove the entire assembly from the engine.

SMALL | MEDIUM | LARGE
   


Remove the hoses and bracket from the viscosity sensor.

  1. Main oil rifle pressure
  2. Modified pressure signal to pressure regulator
  3. Return to oil pan.

SMALL | MEDIUM | LARGE
Last Modified:  20-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.