Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 002-004   Cylinder Head

Table of Contents

Remove

Remove

 TOC

 WARNING 

This component weighs 23 kg [50 lb or more. To reduce the possibility of personal injury, use a hoist or get assistance to lift this assembly.

Remove the two fuel crossover connections and the o-rings.

To prevent increased wear, mark each cylinder head as it is removed so it can be installed back in its original location.

Remove the 12 capscrews and washers from each cylinder head.

Lift the cylinder heads from the block, and remove the cylinder head gaskets.

SMALL | MEDIUM | LARGE


 CAUTION 

To prevent damage to the head gasket surface, put the cylinder heads on wooden blocks when they are removed.
 
SMALL | MEDIUM | LARGE
Last Modified:  31-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.