Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 004-001   Cam Follower Assembly

Table of Contents

Install

Install

 TOC

Install the new cam follower gaskets to the block as follows:

  • Obtain gaskets with the same thickness as the gaskets removed.
  • Install the gaskets over the dowel pins in the block.

Lubricate the camshaft prior to installing the cam followers.

NOTE: The Print-o-Seal gasket

must
be against the cylinder block with the sealing bead toward the cam follower housing.

SMALL | MEDIUM | LARGE


Install the cam follower assembly as follows:

  • Install the capscrews and the studs in the same position from which they were removed.

SMALL | MEDIUM | LARGE
   


  • Tighten the capscrews in the alternating sequence, as illustrated, to the following torque values:
Torque Value:

  1. 20 n.m   
    [177 in-lb]
  2. 47 n.m   
    [35 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  29-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.