Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 001-046   Piston Cooling Nozzle

Table of Contents

Install

Install

 TOC

Use vegetable oil to lubricate the new o-rings. Do

not
soak the new o-rings in engine oil.

Install the o-rings into the groove of the piston cooling nozzle.

SMALL | MEDIUM | LARGE


 CAUTION 

Do not use the capscrew to pull the nozzle into the cylinder block. Nozzles and o-ring damage or external oil leaks can result.

Install the nozzles into the cylinder block.

NOTE: Make sure the oil passage opening in the piston cooling nozzle is pointing up toward the piston.

SMALL | MEDIUM | LARGE
   


Install the capscrews.

Tighten the Nyloc capscrews.

Torque Value:  25  n.m  [220 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  12-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.