Posted on by

B5.9G, B5.9LPG, B Gas Plus, B LPG Plus, and B Gas International Engines – 008-002   Drive Belt, Cooling Fan

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

3/8-Inch Square Drive

Lift the tensioner to remove the drive belt.

NOTE: The belt tensioner is spring-loaded and must be pivoted away from the drive belt. Pivoting in the wrong direction can result in damage to the belt tensioner.

SMALL | MEDIUM | LARGE

Inspect for Reuse

 TOC

Inspect the belt for:

  • Cracks
  • Glazing
  • Tears or cuts
  • Excessive wear.

SMALL | MEDIUM | LARGE
   

Install

 TOC

3/8-Inch Square Drive

Lift and hold the belt tensioner. Install the drive belt, and release the tensioner.

NOTE: The belt tensioner is spring-loaded and must be pivoted away from the drive belt. Pivoting in the wrong direction can result in damage to the belt tensioner.

NOTE: After the belt tensioner has been raised to remove or install the belt, check the torque of the tensioner capscrew.

Torque Value:  43  n.m  [32 ft-lb]
  
SMALL | MEDIUM | LARGE
Last Modified:  18-Nov-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.