Posted on by

B5.9G, B5.9LPG, B Gas Plus, B LPG Plus, and B Gas International Engines – 008-087   Cooling Fan Belt Tensioner

Table of Contents

Remove
Install

Remove

 TOC

NOTE: The belt tensioner is spring loaded and must be pivoted away from the drive belt. Pivoting in the wrong direction can result in damage to the belt tensioner.

3/8-Inch Square Drive

Lift belt tensioner to relieve tension in the belt, and remove the belt.

SMALL | MEDIUM | LARGE


15 mm

Remove the capscrew and belt tensioner from the bracket.

SMALL | MEDIUM | LARGE
   

Install

 TOC

15 mm

Install the tensioner and capscrews.

Torque Value:  43  n.m  [32 ft-lb]

SMALL | MEDIUM | LARGE
   


3/8-Inch Square Drive

Lift and hold the tensioner. Install the drive belt and release the tensioner.

Service Tip: If difficulty is experienced installing the drive belt; for example, the belt seems too short; position the belt over the grooved pulleys first; then, while holding the tensioner up, slide the belt over the water pump pulley.

SMALL | MEDIUM | LARGE
Last Modified:  13-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.