M11 Industrial Operation and Maintenance – Engine Acceleration or Response Poor

Electronic fault codes are active

For instructions on how to read active fault codes, refer to Procedure 101-007 (Electronic Controlled Fuel System) in Section 1. If fault codes are active, contact a Cummins Authorized Repair Facility.

Engine is operating at low ambient temperature

Check the winterfront, shutters, and under-the-hood air. Use under-the-hood intake air in cold weather. Refer to Procedure 101-015 (Operating the Engine) in Section 1.

Air intake or exhaust leaks

Check for loose or damaged piping connections and missing pipe plugs. Check the turbocharger and exhaust manifold mounting. Refer to Procedure 010-024 (Air Leaks, Air Intake and Exhaust System) in Section 5.

Fuel temperature is above specification

Fill the fuel tanks. Turn off or bypass the fuel heater, if equipped. Refer to the OEM service manual.

Fuel grade is not correct for the application or the fuel quality is poor

Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V .

Drivetrain is not correctly matched to the engine

Check for correct gearing and drivetrain components. Refer to the OEM service manual.

Engine is operating at high ambient temperature

Use outside air to the turbocharger in hot weather.