Centinel System – Repair Manual – 011-022   EGR Valve

Before installing the v-band clamp, coat the clamping surface with high temperature anti-seize compound.

Install the smaller v-band clamp on the EGR cooler connection. Do not tighten.

Install the larger v-band clamp on the end of the EGR valve that connects with the exhaust manifold. Do not tighten.

Install a new gasket on the piloted end of the EGR cooler connection.

Install a new gasket on the piloted end of the EGR valve where it connects to the exhaust manifold.

Install the EGR valve. Position the EGR connection v-band clamp, as shown, and tighten.

Lubricate the EGR valve seal with clean engine oil.

Install the EGR valve onto the EGR valve mounting bracket.

Install the four mounting capscrews into the EGR valve mounting bracket.

Tighten the capscrews.

NOTE: The longest capscrew passes through the EGR valve and EGR valve mounting bracket and threads into the engine block.

Connect the EGR valve connector.