Posted on by

Centinel System – Repair Manual – 010-113   Turbocharger, Variable Geometry Actuator

View Related Topic

Table of Contents

Install
 
Variable Geometry

Install

 TOC

Variable Geometry


 WARNING 

Keep fingers and hands away from the actuator link to reduce the possibility of personal injury as a result of sudden movement when air is supplied.

Use coupling, Part Number 3824843, to apply 414 kPa [60 psi] regulated air pressure to the actuator.

Install the actuator on the turbocharger bearing housing.

Install and tighten the two capscrews.

Torque Value:  17  n.m  [150 in-lb]

SMALL | MEDIUM | LARGE


Install the actuator rod to the turbocharger cross-shaft.

Install the snap ring.

Install and tighten the capscrew.

Torque Value:  23  n.m  [17 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  23-Apr-2007
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.