Posted on by

Centinel System – Repair Manual – 006-006   ECM Cooling Plate, Fuel Cooled

Table of Contents

Install

Install

 TOC

Install five insulating washers. The one ground washer must be installed in the upper left cooling plate mounting capscrew hole.

SMALL | MEDIUM | LARGE


 CAUTION 

Make sure that the insulating washers and the ground washer are installed properly on the cooling plate or malfunction of the ECM can occur.

Install the cooling plate gasket.

Install the six cooling plate mounting capscrews and washers.

Torque Value:  20  n.m  [15 ft-lb]

Install the ECM.

Install and tighten the five ECM mounting capscrews.

Torque Value:  20  n.m  [15 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the ECM cooling plate fuel supply line (bottom) to the integrated fuel system module and the ECM cooling plate.

Install the ECM cooling plate fuel return line (top) to the fuel pump and the ECM cooling plate.

Torque Value:  25  n.m  [18 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  08-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.