Posted on by

Centinel System – Repair Manual – 008-030   Fan Drive Idler Pulley Assembly

View Installation Instruction

Preparatory Steps

 TOC

 
SMALL | MEDIUM | LARGE

Remove

 TOC

On initial installation, remove the three capscrews indicated in the illustration from the lower front cover.

  
SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the bracket on the engine with the three spacers and three capscrews.

Tighten the capscrews.

Fan drive idler pulley bracket capscrew M8x60mm 18 n.m [159 in-lb]
 
SMALL | MEDIUM | LARGE
   


Mount the fan drive idler pulley assembly to the fan drive idler pulley bracket and tighten the capscrew. Make sure the washer is centered on the idler pulley.

Fan drive idler pulley assembly capscrew M10x80mm 54 n.m [40 ft-lb]

Install the dust shield by pressing on the outside diameter of the shield to prevent damage to the dust shield.

Use an appropriate size driver or other suitable tool.

  
SMALL | MEDIUM | LARGE
   

Finishing Steps

 TOC

Install the drive belt.
Refer to Procedure 008-002 in Section 8.

 
SMALL | MEDIUM | LARGE
Last Modified:  26-Oct-2009
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.