Posted on by

Electronic Control System Gas Plus Engines – Fault Code Warning Lamps Do Not Illuminate

Symptom Tree  t084

This is symptom tree t084
Cause Correction

Verify the complaint

Refer to the INSITE™ electronic service tool User Manual.
 

Fault code warning lamps are burned out

Check the warning lamps for voltage. Replace the bulbs if necessary. Refer to Procedure 019-047.
 

Fault code warning lamp circuit is malfunctioning

Check the fault code warning lamp circuit. Refer to Procedure 019-047.
 

Battery voltage is low

Inspect the batteries and the unswitched battery supply circuit. Refer to Procedure 019-087.
 

Diagnostic switch or circuit is malfunctioning

Check the diagnostic switch and circuit. Refer to Procedures 019-027 and 019-028.
 

Keyswitch circuit is malfunctioning

Check the vehicle, equipment, or vessel keyswitch circuit. Refer to Procedure 019-064.
 

Fault code warning lamp is not correct

Verify that the fault code warning lamp bulb is rated for 12 VDC and 200 mA. Refer to Procedure 019-046.

 
Last Modified:  29-Sep-2004
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.