Posted on by

Electronic Control System Gas Plus Engines – 019-121   Throttle Position Sensor

View Related Topic

Table of Contents

General Information
Remove
Install

General Information

 TOC

This sensor is only found on the B Gas International engine.

The throttle plate position sensor measures the percentage of throttle plate opening and sends a signal to the ECM.

  
SMALL | MEDIUM | LARGE

Remove

 TOC

Unplug the sensor.

Remove the two screws and sensor.

SMALL | MEDIUM | LARGE
   

Install

 TOC

To install the new sensor, point the connector end away from the engine and place the sensor shaft in position on the throttle plate shaft.

Rotate the sensor clockwise until the screw holes are aligned.

Install screws.

Torque Value:  3  n.m  [25 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  16-Nov-2004
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.