Posted on by

Electronic Control System Gas Plus Engines – 019-433   Air Inlet Restriction Sensor

Table of Contents

Remove
Install

Remove

 TOC

Disconnect the sensor from the engine harness. Slide the locking tab sideways. Push down on the button toward the rear of the connector and disconnect from the sensor.

Remove the sensor by turning it counterclockwise.

SMALL | MEDIUM | LARGE

Install

 TOC

Install a new sensor by turning it clockwise.

Torque Value:  14  n.m  [124 in-lb]

Connect the engine harness to the sensor. Slide the lock tab sideways to lock the connector to the sensor.

SMALL | MEDIUM | LARGE
Last Modified:  13-Jul-2004
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.