ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines - 022-001 Service Tools

Cylinder Head

TOC

Tool Number

3163100

Valve Guide Installer

Used to install valve guides.

Tool Number

3163101

Valve Guide Remover

Used to remove valve guides.

Tool Number

3163293

Boot Pliers

Used to remove valve stem seals. The twist and pull action frees the boot and the serrated jaws provide a secure grip.

Tool Number

3163720

Dowel Pin Extractor

This puller contains various sized collets to remove crosshead guides or dowels throughout the engine.

Tool Number

3164329

Valve Spring Compressor

Used to remove and install valve collets.

Tool Number

3164438

Depth Gauge Assembly

Used to measure injector protrusion and valve intrusion and/or protrusion. Equipped with electronic digital indicator.

Tool Number

3165113

Intake Valve Seat Extractor Collet

Used with slide hammer, Part Number 3376517. The slide hammer is sold separately.

Tool Number

3165114

Exhaust Valve Seat Extractor Collet

Used with slide hammer, Part Number 3376517. The slide hammer is sold separately.

Tool Number

3165115

Valve Seat Installer

Used for installing intake and exhaust valve seats.

Tool Number

3375182

Valve Spring Tester

Used to check spring tension.

Tool Number

3375432

Crack Detection Kit (Dye Type)

Used to clean and inspect components for cracks.

Tool Number

3375805

Valve Lapping Compound

An abrasive compound used to lap the valves.

Tool Number

3376405

Valve Seat Grooving Tool

Used to cut a groove in the valve seat. This is often required prior to use of the valve seat extractor. It requires cutter bit, Part Number 3376407. The cutter bit is sold separately.

Tool Number

3376617

Slide Hammer Assembly

Used with the valve seat extractor to remove the valve seat inserts from the cylinder head.

Tool Number

3823186

Valve guide Arbor

Used for positioning to valve guide inside diameter, to cut valve seats, and to cut valve seat pockets for oversize seats. It can also be used with gauge, Part Number ST-685-4, to check valve seat concentricity.

Tool Number

3822509

Injector Bore Brush

Used to clean carbon from injector bores.

Tool Number

3823258

Abrasive Pad

Used to clean carbon from the upper liner bores, remove rust and corrosion, and scuff surfaces.

Tool Number

3823921

Capscrew Length Gauge

Used to measure capscrew free length.

Tool Number

3824277

Valve Vacuum Tester

Used with vacuum cup, Part Number ST-1257-6, to vacuum test the cylinder head, to determine if the valves are properly seated.

Tool Number

3824591

Engine Barring Gear

Used to engage the flywheel ring gear to rotate the crankshaft.

Tool Number

4918219

Precision Straightedge

Used to check cylinder head combustion decks for flatness.

Tool Number

ST-1166

Magnetic Crack Detector

Used to inspect the cylinder head combustion face for cracks in the injector bore and valve seat areas. The kit includes powder spray bulb, Part Number ST-1166-7, used for spraying the metal powder, Part Number ST-1166-8.