Posted on by

ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 009-016   Hydraulic Pump Drive

Remove

 TOC

Disconnect all hydraulic lines from the pump.

SMALL | MEDIUM | LARGE


Remove the hydraulic pump and gear assembly.

Refer to the equipment manufacturer’s service manual for removal procedures.

SMALL | MEDIUM | LARGE
   

Clean

 TOC

Clean the gasket material from the hydraulic pump.

SMALL | MEDIUM | LARGE
   


 WARNING 

When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer’s recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury.
 WARNING 

Some solvents are flammable and toxic. Read the manufacturer’s instructions before using.
 WARNING 

Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury.

Clean the hydraulic pump gear with solvent.

Dry with compressed air.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Inspect the hydraulic pump drive gear for damage.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Use a new gasket and install the hydraulic pump.

SMALL | MEDIUM | LARGE
   


Connect all hydraulic lines to the pump.

SMALL | MEDIUM | LARGE
   


Tighten mounting bolts.

Torque Value:  43  n.m  [32 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  19-Jun-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.