Posted on by

CM871 and CM876 Electronic Control Systems, ISX and ISM Engines – 019-119   Engine Fuel Temperature Sensor

Table of Contents

General Information
Remove
Install

General Information

 TOC

The engine fuel temperature sensor is located on the back side and underneath of the integrated fuel system module. The sensor senses the temperature of the fuel supplied to the timing and fueling actuators.

  
SMALL | MEDIUM | LARGE

Remove

 TOC

Clean the area around the engine fuel temperature sensor.

Disconnect the engine fuel temperature connector from the engine harness.

Remove the fuel pressure sensor.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install a new o-ring. Apply grease to the o-ring groove to retain the o-ring during installation.

Torque Value:  23  n.m  [17 ft-lb]

Connect the engine harness to the fuel pressure sensor.

Operate the engine and check for leaks.

SMALL | MEDIUM | LARGE
Last Modified:  20-Feb-2006
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.