Posted on by

Centinel System – Repair Manual – 007-025   Lubricating Oil Pan

View Related Topic

Table of Contents

Install

Install

 TOC

Apply a 1.97 mm [1/8 in] bead of silicon sealant, Part Number 3164067, to each of the four T-joints where the front gear housing and flywheel housing gaskets intersect the oil pan gasket.

SMALL | MEDIUM | LARGE


Install a new oil pan gasket.

Install the oil pan onto the cylinder block. Install one of the 13 mm oil pan mounting capscrews, hand tight, on each side of the oil pan, halfway between the front and the rear of the oil pan.

Finger-tighten all or the mounting capscrews.

SMALL | MEDIUM | LARGE
   


Tighten the thirty-two 13 mm capscrews in the sequence shown.

At the end of the sequence, loosen and tighten capscrew number 1again.

Torque Value:  55  n.m  [41 ft-lb]

Install the oil drain plug.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  07-Jul-2008
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.