Table of Contents Remove Remove TOC Remove the inlet tube (1) and fitting (2). Remove the outlet tube clamp capscrew (3) and the tube. SMALL | MEDIUM | LARGE…

Table of Contents Remove Remove TOC Remove the threee mounting capscrews and the support. SMALL | MEDIUM | LARGE Last Modified:  12-Oct-2005 Feedback / Help

Table of Contents Remove Remove TOC NOTE: For fan hub installations that were not manufactured by Cummins Inc., contact the OEM. Loosen the fan idler pulley…

Table of Contents Remove Remove TOC Remove the fan drive pulley. Remove the four capscrews and the fan hub. SMALL | MEDIUM | LARGE Last Modified:  12-Feb-2009 Feedback / Help

Table of Contents Remove Remove TOC Remove the fan hub, clutch and capscrews from the engine. SMALL | MEDIUM | LARGE Last Modified:  23-Jan-2009 Feedback / Help

Table of Contents Remove Remove TOC Remove the capscrews and the front lifting bracket. Remove the capscrews and the rear lifting bracket. SMALL | MEDIUM | LARGE Last Modified:  23-Jan-2009…

Table of Contents Remove   With EGR Without EGR Remove TOC With EGR Remove the water header plate and gasket. SMALL | MEDIUM | LARGE Next Without EGR Remove…

Table of Contents Remove Remove TOC Disconnect the electrical wiring from the cylinder block heater, if used. Remove any additional fittings or accessories from the…

Table of Contents Remove Remove TOC Remove the three capscrews and the filter head. Remove the two o-rings. SMALL | MEDIUM | LARGE Last Modified:  23-Jan-2009 Feedback / Help

Table of Contents Remove   With EGR Without EGR Remove TOC With EGR Remove the two oil cooler water connection retainer mounting flange capscrews. SMALL | MEDIUM | LARGE…