SMALL | MEDIUM | LARGE Engine Family: N14, M11, QSM11, QST30 This cable allows the “INPOWER” service tool to communicate with the current “Powercommand Control 3100”. Last Modified: 07-Apr-2006 Feedback…
SMALL | MEDIUM | LARGE Engine Family: Signature, ISX, ISM, QSX15, and QSM11 This datalink cable is used with the INLINE II Adapter kit, Part No. 3163682, to connect…
SMALL | MEDIUM | LARGE Engine Family: QST30 This cable is used to check the voltage from the electronic control module (ECM) to the Bosch fuel pump shutoff valve…
SMALL | MEDIUM | LARGE Engine Family: B3.3 Connects the OEM wiring harness to the alternator. NOTE: Part No. 3163908 is an assembled connector. Part No. 3163896 Electrical Connector is…
SMALL | MEDIUM | LARGE Engine Family: Power Gen This 20 ft., 9 pin null-modem cable allows direct connection between the PC and the Power Generation ECM. Last Modified: 07-Apr-2006…
SMALL | MEDIUM | LARGE Engine Family: QST30-G Drive, QST30 w/Dominion Control Module This cable is used to connect the control module diagnostic connector directly to RS232 (9-pin) port…
SMALL | MEDIUM | LARGE Engine Family: ISX This cable allows technicians to break into the Engine Brake System to diagnose problems. Includes 3162991 (Brake Breakout Cable) and 3163092…
SMALL | MEDIUM | LARGE Engine Family: QST30, QSK45, QSK60, QSK78, QSV81/91 This electrical wiring harness is a pressure sensor break-out test kit for DanFoss™ pressure sensors. There are…
SMALL | MEDIUM | LARGE Engine Family: ISC, ISX, CELECT, NT/N14, L10/M11 Part No. Description 3162898 Sensor Breakout Cable – ISX 3824774 Sensor Breakout Cable – CELECT,NT/N14,M11/L10,ISB Air Pressure…
SMALL | MEDIUM | LARGE Engine Family: CENSE This bench calibration harness makes it possible to calibrate a CENSE ECM directly. Do NOT use on QSK 19/45/60. Use with…