SMALL | MEDIUM | LARGE Engine Family: NT This special compressor arrangement permits the removal of 2 valve springs, wear plates, and valve spring retainers without removal of the…
SMALL | MEDIUM | LARGE Engine Family: All The tester is used to compress the valve spring to the proper height and then check the pressure tension on the…
SMALL | MEDIUM | LARGE Engine Family: ISB (4 Cylinder), ISBe (4 and 6 Cylinder) Valve Stem Seal Installer is used to install the valve stem seal to correct…
SMALL | MEDIUM | LARGE Engine Family: V/VT903 This tool is used to install the valve stem seal, part number 400643 on the V/VT903. This procedure requires 3163293, boot…
SMALL | MEDIUM | LARGE Engine Family: B/C This tool compresses the valve spring to allow removal and/or installation of valve stem keepers while reducing the chance of damage…
SMALL | MEDIUM | LARGE Engine Family: L10, L10G, M11, QSM, ISM, ISM W/CM870 This tool is designed to be used to remove and install the valve springs, valves…
SMALL | MEDIUM | LARGE Engine Family: See below This base kit will facilitate easy removal and installation of four springs at once resulting in time savings. 3163606 includes…
SMALL | MEDIUM | LARGE Engine Family: Signature/ISX This tool uses the injector bore and hold-down clamp as a base to compress all four valve springs at once. The…
SMALL | MEDIUM | LARGE Engine Family: Onan J Simplifies removal of valve locks. Use with an arbor press or other valve spring compressor. Use on all J series…
SMALL | MEDIUM | LARGE Engine Family: ISB, ISB(4 cylinder) ISBe(4 and 6 cylinder) ISC, ISL, QSB 3.9/5.9, ISCe, QSC 8.3, QSL9 This kit allows the 4 valve springs…