SMALL | MEDIUM | LARGE Engine Family: See Below Valve seat cutters are used with ST 257 valve seat insert tool to cut cylinder head intake/exhaust valve insert counterbores…

SMALL | MEDIUM | LARGE Engine Family: All Except B Series This kit is used with appropriate cutters to counterbore cylinder heads for installation of valve seat inserts. A…

SMALL | MEDIUM | LARGE Engine Family: QST 30 This is a special sized mandrel for removing the valve guides from the cylinder head during engine rebuild. Last Modified:  31-Jul-2003…

SMALL | MEDIUM | LARGE Engine Family: L10 This material is used to install valve seals onto the valve guides when valves are not installed in the head. Last…

SMALL | MEDIUM | LARGE Engine Family: All These reamers are used to ream the i.d. of valve guides as required to assure that the valves will have proper…

SMALL | MEDIUM | LARGE Engine Family: See Below The above illustration shows valve guide driver and valve guide remover. The valve guide driver assures that the valve guide…

SMALL | MEDIUM | LARGE Engine Family: M11 Used to install valve seals to specified height. 3163602 – Valve Seal Installer (used to install 4003965 seals on 1.828 high…

SMALL | MEDIUM | LARGE Engine Family: K An inspection tool for checking the valve guide bore, after it is pressed into the cylinder head. This item consists of…

SMALL | MEDIUM | LARGE Engine Family: QSK19, QSK45, QSK60 The cylinder head valve stem seal depth gauge is used to set the required clearance when installing the valve…

SMALL | MEDIUM | LARGE Engine Family: QST30 This tool is required to install the seal over the guide without any damage to the seal lip. Last Modified:  30-Jun-2006 Feedback…