SMALL | MEDIUM | LARGE Engine Family: NT855 This special wrench is used to remove the two (7/16) capscrews nearest the cylinder block on All NT 855 series engines.…

SMALL | MEDIUM | LARGE Engine Family: B Series W/Bosch VE Pumps This is a special wrench used to adjust the Bosch VE series pump idle adjust jam nut.…

SMALL | MEDIUM | LARGE Engine Family: All B Series This special bent wrench is used to gain access to the bottom-most nut for installation and/or removal of CAV…

SMALL | MEDIUM | LARGE Engine Family: L10, B and C Series This special bent wrench is required for those difficult to reach fuel pump mounting capscrews. Sizes are…

SMALL | MEDIUM | LARGE Engine Family: NT This internal pipe wrench is used to install or remove the hose coupling from the thermostat housing as required. These apply…

SMALL | MEDIUM | LARGE Engine Family: N-14 This special curved ratcheting wrench was designed for the N14 air compressor mounting nuts. The location of one of the mounting…

SMALL | MEDIUM | LARGE Engine Family: K38, L10 This special bent wrench is used to remove and/or install the air compressor mounting support capscrews. Size is 7/16 and…

SMALL | MEDIUM | LARGE Engine Family: K19, K38, K50, NT, V28, V378, V555, V903, V504 This special 7/16 in. curved wrench will enable the AFC front cover and…

SMALL | MEDIUM | LARGE Engine Family: N14 This Torque/Angle Socket Gauge is a special marked, heavy duty, socket used to both achieve the correct angle and to check…

SMALL | MEDIUM | LARGE Engine Family: All This special ½ inch drive spinner can be used to tighten capscrews by the template method. Notches are evenly spaced at…