SMALL | MEDIUM | LARGE Engine Family: C8.3, C8.3G, ISC, QSC8.3, ISL, QSL9 This special driver is used to install the crankshaft front oil wear sleeve as required to…
SMALL | MEDIUM | LARGE Engine Family: B Series This tool is used to install the .052 thick wall and wider wear sleeve onto the front of the crankshaft.…
SMALL | MEDIUM | LARGE Engine Family: C Series This tool is used to install the front crankshaft oil seal in the front cover, from the engine side. This…
SMALL | MEDIUM | LARGE Engine Family: B Series This tool is used to install the front crankshaft oil seal in the front cover, from the engine side. This…
SMALL | MEDIUM | LARGE Engine Family: NT This tool is used to remove the accessory drive pulley wear sleeve, for the N14 series engines, with reduced diameter shaft…
SMALL | MEDIUM | LARGE Engine Family: NT This driver is designed to install the accessory drive oil seal into the gear cover. The tool will also install the…
SMALL | MEDIUM | LARGE Engine Family: K38, K50, V28 This tool is designed to install the new thick wall (.062 in.) wear sleeve and oil seal assembly on…
SMALL | MEDIUM | LARGE Engine Family: NH and NT This tool is designed to drive the rear crankshaft oil seal into the rear cover on N14 and NT…
SMALL | MEDIUM | LARGE Engine Family: B and C Series This installer is used to install rear crankshaft oil wear sleeve/seal combination. The tool may also be used…
SMALL | MEDIUM | LARGE Engine Family: N855 This tool is used to install the double lip and single lip seals in the “wet” rear cover plate without disturbing…