SMALL | MEDIUM | LARGE Engine Family: B, C and ISF3.8 Series This kit is designed to remove or replace the valve tappets. Ref. No. Part No. Description 1…
SMALL | MEDIUM | LARGE Engine Family: V28 This group of special tools are required to install and remove the floating tappet design valve and injector tappets. Also included…
SMALL | MEDIUM | LARGE Engine Family: ISC, QSC8.3, ISL, QSL9 w/common rail Fuel System, ISL9 w/CAPS Fuel System To aid in the removal and installation of roller tappets…
SMALL | MEDIUM | LARGE Engine Family: NT This special spin on cap is used in place of spin on water filter for certain NT Big Cam IV truck…
SMALL | MEDIUM | LARGE Engine Family: All Engine Models This tool is designed to pull the spline drive coupling on fuel pumps and air compressors. Ref. No. Part…
SMALL | MEDIUM | LARGE Engine Family: L10 This driver is used to install the pressure regulator valve seal p/n 3026758 in the bottom of the valve bore. Last…
SMALL | MEDIUM | LARGE Engine Family: NH, NT This special fixture is used to provide the support needed when pressing the breather tube in steel stamped valve covers.…
SMALL | MEDIUM | LARGE Engine Family: K19 This special bracket kit is designed to fit many different truck frames when the oil pan is removed. These brackets attach…
SMALL | MEDIUM | LARGE Engine Family: QSV-D, QSV-G Stud replacer designed to replace cylinder head studs in all QSV (diesel) and QSV-G (natural gas) engine models. Last Modified: 07-Apr-2006…
SMALL | MEDIUM | LARGE Engine Family: Signature There are two water grommet seals P/N 3688521 pressed into the block for the air compressor inlet & outlet. This installer…