1. Remove the oil pump drive clam retaining bolt. 2. Remove the oil pump drive clamp. 3. Remove the oil pump drive. 4. Remove the…
1. Loosen the Crankcase Depression Regulator (CDR) valve vent hose clamp at the CDR valve. 2. Remove the CDR valve vent hose (3) from the…
Tools Required • J 41515-A Glow Plug Socket • J 41712 Oil Pressure Sending Unit Socket 1. Disconnect all engine wiring harness connectors. 2. Disconnect…
1. Remove the fuel manager/filter assembly retaining bolts. 2. Loosen the fuel hose clamps at the fuel filter assembly. 3. Remove the fuel hoses from…
1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector. 2. Remove the IAT sensor. 3. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.…
1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector. 2. Remove the IAT sensor. 3. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.…
1. Remove the air bleed valve. 2. Remove the water outlet retaining bolts. 3. Remove the water outlet (1). 4. Remove the thermostats (2) with…
1. Remove the oil level indicator. 2. Remove the oil level indicator tube retaining bolt. 3. Remove the oil level indicator tube. 4. Remove the…
1. Remove the oil fill tube retaining nuts. 2. Remove the oil fill tube.
Tools Required J 43276 Clutch Pilot B earing Remover Caution: Wear safety glasses in order to avoid eye damage. Notice: When using the J 43276…