1. Install the accessory bracket to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the accessory bracket bolts to the engine block.
Tighten
Tighten the bolts to 50 N-m (37 Ib ft).
Tighten the nuts to 50 N-m (37 Ib ft).
3. Install the drive belt tensioner to the accessory bracket. Refer to Drive Belt Tensioner Replacement.
4. Install the vacuum pump to the accessory bracket, Refer to Vacuum Pump Replacement.
5. Install the generator to the accessory bracket.
Refer to Generator Replacement (CS 130D) in Engine Electrical.
6. Install the drive belt on the drive pulleys. Refer to Drive Belt Replacement (6.5L Drive Belt).
7. Install the upper fan shroud to the radiator. Refer to Fan Shroud Replacement (Upper) in Engine Cooling.
8. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Engine Electrical
