 |
Symptom Tree t126
| Cause | Correction |
|---|
|
Lower throttle lever is not locked wide open |
Make sure the lower throttle lever linkage opens the throttle wide open. Refer to Procedure 005-035 in Section 5. |
 |
|
Variable speed (VS) governor linkage is not fully open or is set to idle |
Adjust the throttle linkage. Refer to Procedure 005-036 in Section 5. |
|
|
Low speed screw is not adjusted correctly |
Loosen the locknut and adjust the rear screw. Refer to Procedure 005-029 in Section 5. |
|
|
High-speed screw is not adjusted correctly |
Loosen the locknut, and adjust the high-speed (top-0) screw. Refer to Procedure 005-029 in Section 5. |
|
|
High?speed spring is not correct |
Remove the fuel pump and change the spring. Refer to Procedure 005-016 in Section 5. |
|
|
Lever screw does not allow the throttle lever plunger to move |
Remove the fuel pump. Refer to Procedure 005-016 in Section 5. |
|
