Cummins N14 STC, Celect, Celect Plus – Service Manual 005-035   Fuel Pump Throttle Lever

Table of Contents

Adjust

Adjust

TOC

 CAUTION 

Do not make any adjustments to the throttle stop screws. If the throttle does not break over correctly, adjust the throttle lever or linkage.

Make sure the throttle linkage is adjusted so the throttle lever breaks over 3.0 to 6.0 mm [0.12 to 0.24 in] when the lever is in the full throttle position.

NOTE: The throttle lever stop

must
contact the rear throttle stop screw.

 
SMALL | MEDIUM | LARGE
Last Modified:  18-Oct-2011