Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 004-001   Cam Follower Assembly

Table of Contents

Remove

Remove

 TOC

Remove the cam follower housing assemblies as follows:

  • Remove the six capscrews and studs from each cam follower housing.

NOTE:  Record the position of the studs prior to removal.

  • Remove the cam follower housings and gaskets.

NOTE: To prevent increased wear, mark the cam follower housing assemblies as they are removed so they can be installed into their original location on the block.

SMALL | MEDIUM | LARGE


Measure and record the thickness of the gaskets used between each cam follower housing and the block.

NOTE: The thickness of the gaskets controls the injection timing.

Discard the gaskets.

SMALL | MEDIUM | LARGE
Last Modified:  29-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.