Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 001-009   Camshaft Bearing Support

Table of Contents

Remove

Remove

 TOC

Remove the three capscrews from the support.

Use a rubber or plastic mallet to rotate the bearing support approximately 60 degrees.

SMALL | MEDIUM | LARGE


NOTE: Be careful not to damage the bearing support surfaces when removing the bearing support.

Use a suitable pry bar to remove the bearing support from the gear cover.

SMALL | MEDIUM | LARGE
   


Remove the o-ring and the shims from the bearing support.

NOTE: Do not dispose of the shims.

SMALL | MEDIUM | LARGE
Last Modified:  29-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.