Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 008-062   Water Pump

Table of Contents

Install

Install

 TOC

 CAUTION 

The water pump must have a dowel pin locating hole (2) and an oil cooler return passage (1). Engine damage can occur due to lack of coolant flow through the oil cooler if this oil cooler return passage does not exist.
 
SMALL | MEDIUM | LARGE


Install the water transfer tube attached to the thermostat housing into the water pump.

Inspect the transfer tube o-ring. Replace if necessary.

SMALL | MEDIUM | LARGE
   


Install the water pump to the block using the six mounting capscrews.

Tighten the capscrews to the following torque values:

Torque Value:

  1. 15 n.m   
    [133 in-lb]
  2. 30 n.m   
    [22 ft-lb]
  3. 47 n.m   
    [35 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the coolant inlet transfer connection and a new gasket onto the water pump.

Tighten the capscrews.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  14-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.