Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 012-004   Air Compressor Coolant Lines

Table of Contents

Install

Install

 TOC

NOTE: If rubber grommets are used on the coolant lines, make sure they are installed carefully to prevent cuts or tears to the grommets which can cause coolant leaks. When flexible tubing is used, make sure that it does not rub any other surfaces.

Connect the tubes to the fittings on the air compressor cylinder head, thermostat support, and block.

Make sure the tube extends into the fitting as far as possible.

SMALL | MEDIUM | LARGE


Install the coolant lines to the air compressor and water pump.

  
SMALL | MEDIUM | LARGE
   


Install the coolant line to the thermostat housing.

  
SMALL | MEDIUM | LARGE
Last Modified:  03-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.