Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 008-006   Coolant Filter

Table of Contents

Install

Install

 TOC

 CAUTION 

Mechanical over-tightening can distort the threads or damage the filter head.

Apply a light film of lubricating oil to the coolant filter gasket sealing surface before installing the coolant filter.

Install the filter as specified by the manufacturer.

SMALL | MEDIUM | LARGE


 CAUTION 

Severe engine damage will result if the shutoff valve is left closed.

After the filter has been changed, open the shutoff valve and install the radiator pressure cap.

SMALL | MEDIUM | LARGE
   


Operate the engine until the coolant temperature is above 82°C [180°F], and check for coolant leaks.

After the air has been purged from the system and a minimum of 30 minutes of operation, check the coolant level and top off as needed with premixed coolant.

SMALL | MEDIUM | LARGE
Last Modified:  03-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.