Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 007-013   Lubricating Oil Filter (Spin-On)

Table of Contents

Install

Install

 TOC

 CAUTION 

Mechanical overtightening can distort the threads or damage the filter element seal.

Fill the filter with clean 15W-40 oil.

Install the filter onto the oil filter head. Tighten the filter until the gasket contacts the filter head surface.

Use oil filter wrench, Part Number 3375049, to tighten the filter an additional three-fourths to one (¾ to 1) turn, or follow the instructions supplied with the filter.

SMALL | MEDIUM | LARGE


Confirm that the oil level in the pan is to the full mark.

Operate the engine until the water temperature reaches 82°C [180°F]. Check the oil pressure and check for leaks.

SMALL | MEDIUM | LARGE
Last Modified:  03-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.