Posted on by

B5.9G, B5.9LPG – Troubleshooting and Repair Manual – 010-046   Turbocharger Oil Supply Line

Initial Check

 TOC

Inspect the line for oil leaks or damage. Replace as necessary.

SMALL | MEDIUM | LARGE

Remove

 TOC

Remove the oil supply line from the oil filter head (1).

Remove the oil supply line from the turbocharger bearing housing (2).

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Inspect the line for cracks, wear, and damage.

Inspect o-rings for cracking and fretting. Replace as necessary.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Apply a thin film of oil to the o-ring seals.

Fill the turbocharger oil inlet with clean oil.

Install the oil supply line at both the filter head and the turbocharger bearing housing.

Tighten the oil supply line to final torque.

Torque Value:  24  n.m  [18 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  03-Apr-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.