Centinel System - Repair Manual - 009-056 Alternator/Refrigerant Compressor Mounting Bracket

Install

Install the wire harness jumper to the alternator/refrigerant compressor mounting bracket.

Torque Value: 18 n.m [14 ft-lb]

Tap the split washers out slightly. This will ease the installation.

Install the alternator/refrigerant compressor mounting bracket to the gear housing.

Install the five mounting capscrews.

Tighten the capscrews in the sequence shown.

(1, 2 3 and 4)

36 n.m

[27 ft-lb]

(5)

56 n.m

[41 ft-lb]

The alternator/refrigerant compressor mounting bracket mounts to the gear housing at the top and the water pump at the bottom.

Install the bracket and six mounting capscrews.

Tighten the capscrew that threads into the gear housing.

Torque Value: 56 n.m [41 ft-lb]

Tighten the short capscrew (1).

Tighten the remaining capscrews (2, 3, 4, and 5).

(1, 2, 3, 4, and 5)

34 n.m

[25 ft-lb]

Last Modified: 13-Jun-2005